Quality and Service in Priority
METAL WALL ANCHORS, NYLON & PLASTIC PLUG, SCREWS
Specifications :Expansion Anchors & Fixing Systems
Materials :Expansion Anchors & Fixing Systems
Sizes :Expansion Anchors & Fixing Systems
EXPANSION ANCHOR & FIXING SYSTEM
COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Specifications :Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Materials :Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Sizes :Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Specifications : Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Materials : Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Sizes : Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Specifications : Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Materials : Expansion Wall Anchors
Sizes : Expansion Wall Anchors
Guider tool - for decking screw
Specifications :Guider tool - for decking screw
Materials :Guider tool - for decking screw
Sizes :Guider tool - for decking screw
Organizing assortment
Specifications :Organizing assortment
Materials :Organizing assortment
Sizes :Organizing assortment
Concrete screw
Specifications :Concrete screw
Materials :Concrete screw
Sizes :Concrete screw
Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Specifications :Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Materials :Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Sizes :Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Expansion Wall Anchors
Specifications :Expansion Wall Anchors
Materials :Expansion Wall Anchors
Sizes :Expansion Wall Anchors
Expansion Wall Anchors
MATERIAL: STEEL
SIZE OF SCREW: M4, M5, M6, M8
WITH PAN HEAD SCREW.
WITH C HOOK, O HOOK, L HOOK ALSO AVAILABLE.
BODY SHELLS CAN BE SUPPLIED SEPARATELY.
-- ONE-PIECE TYPE, STAMPING HEAD & NUT AUTOMATICALLY.
-- FAST DELIVERY TIME.
Specifications :NO.105 HOLLOW WALL ANCHOR (ONE-PIECE TYPE)
Materials :NO.105 HOLLOW WALL ANCHOR (ONE-PIECE TYPE)
Sizes :NO.105 HOLLOW WALL ANCHOR (ONE-PIECE TYPE)
MATERIAL: STEEL AND STAINLESS STEEL
METRIC SIZE: M6, M8, M10, M12, M14, M16, M20
UNC SIZE: 1/4”, 3/8”, 1/2”, 5/8”, 3/4”
ASSEMBLED WITH HEX NUT & WASHER
ALTERNATIVES: STUD MADE BY TURNING OR COLD FORGED.
Specifications :NO.302 WEDGE ANCHOR (THROUGH BOLT)
Materials :NO.302 WEDGE ANCHOR (THROUGH BOLT)
Sizes :NO.302 WEDGE ANCHOR (THROUGH BOLT)
Material: steel, zinc plated or yellow z/p or mechanical galvanized.
Size: 10x75, 10x100, 10x130, 10x150, 12x75, 12x100, 12130, 12x150, 16x100, 16x150
Head type: Hex flange head / coupler type (inner thread hole in head)
Installed by electrical power tool, don’t need to use hammer or spanner, in order to save time.
Replace the traditional steel wall anchor.
Specifications :NO.716 CONCRETE SCREWBOLT
Materials :NO.716 CONCRETE SCREWBOLT
Sizes :NO.716 CONCRETE SCREWBOLT
Material: Stainless steel or steel (zinc plated or yellow z/p)
Size: Diameter 7.5mm / Length: from 42mm to 300mm
Head type: Flat head or Round head
The Countersunk Concrete Masonry Screw is suitable for fixing into concrete, stone, lightweight concrete and sandstone.
Specifications :NO.709 CONCRETE SCREW
Materials :NO.709 CONCRETE SCREW
Sizes :NO.709 CONCRETE SCREW
MATERIAL: STEEL
SIZE OF SCREW: M4, M5, M6, M8
WITH PAN HEAD SCREW.
WITH C HOOK, O HOOK, L HOOK ALSO AVAILABLE.
BODY SHELLS CAN BE SUPPLIED SEPARATELY.
Specifications :NO.101 HOLLOW WALL ANCHOR (WELDING TYPE)
Materials :NO.101 HOLLOW WALL ANCHOR (WELDING TYPE)
Sizes :NO.101 HOLLOW WALL ANCHOR (WELDING TYPE)
*EASY TO USE. ONLY USE ELECTRICAL TOOL TO INSTALL.
Specifications :NO.101SD SELF DRILL HOLLOW WALL ANCHOR
Materials :NO.101SD SELF DRILL HOLLOW WALL ANCHOR
Sizes :NO.101SD SELF DRILL HOLLOW WALL ANCHOR
MATERIAL: STEEL AND STAINLESS STEEL
METRIC SIZE: O.D. 8mm, 10mm, 12mm, 16mm, 20mm
UNC SIZE: O.D.1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”
Specifications :NO.301 SLEEVE ANCHOR
Materials :NO.301 SLEEVE ANCHOR
Sizes :NO.301 SLEEVE ANCHOR
MATERIAL: STEEL AND STAINLESS STEEL
SIZES: O.D. 8mm, 10mm, 12mm, 16mm, 20mm
UNC SIZE ANCHOR BOLTS ARE AVAILABLE.
HEX BOLT: 4.6 GRADE, 5.8 GRADE OR 8.8 GRADE
Specifications :NO.301HB SLEEVE ANCHOR WITH HEX BOLT
Materials :NO.301HB SLEEVE ANCHOR WITH HEX BOLT
Sizes :NO.301HB SLEEVE ANCHOR WITH HEX BOLT
MATERIAL: STEEL
SIZE: 6 X 35mm, 6 X 65mm
APPLIED TO CONCRETE ROOF FOR FIXING OBJECTS QUICKLY.
EASY TO USE BY HAMMER – NO MISS AND FAILURE BY FIXING OBJECTS
GOOD PULL-OUT VALUE AFTER FIXING.
HIT BY HAMMER; EASY TO INSTALL.
APPLY TO FIXING FOR CEILING.
Specifications :NO.410 CEILING DRIVE ANCHOR
Materials :NO.410 CEILING DRIVE ANCHOR
Sizes :NO.410 CEILING DRIVE ANCHOR
Material: zinc alloy plug + steel nail.
Size: OD.: 5mm, 6mm, 3/16”, 1/4”
Stainless steel nail also available.
Specifications :NO.503 ZINC HAMMER DRIVE ANCHOR
Materials :NO.503 ZINC HAMMER DRIVE ANCHOR
Sizes :NO.503 ZINC HAMMER DRIVE ANCHOR
Material: hardened steel.
Plating: zinc plated, yellow zinc plated, hot dip galvanized.
Metric size: 6mm & 8mm
Punch at both end, in order to avoid concatenating together.
Installed by hammer.
Specifications :NO.511 EXPRESS NAIL
Materials :NO.511 EXPRESS NAIL
Sizes :NO.511 EXPRESS NAIL
Material: steel, stainless steel
Plating: zinc plated, yellow zinc plated, hot dip galvanized
Size: m8 x 110, m10 x 130, m12 x 160, m16 x 190, m20 x 260, m24 x 300
More sizes available.
Head type: External hex head, Flat head & Embossed body
Depth marking by depth groove or blue painting.
Specifications :NO.703 CHEMICAL ANCHOR THREAD STUD (RESIN STUD)
Materials :NO.703 CHEMICAL ANCHOR THREAD STUD (RESIN STUD)
Sizes :NO.703 CHEMICAL ANCHOR THREAD STUD (RESIN STUD)
Material: Steel
Metric size: m3, m4, m5, m6
Unc size: 1/8”, 3/16”, 1/4”
With round head screw also available.
Hook assembly types: c hook, o hook
Body shells can be supplied separately.
Specifications :NO.601 SPRING TOGGLE
Materials :NO.601 SPRING TOGGLE
Sizes :NO.601 SPRING TOGGLE
** BODY: ALUMIMUN.
**NAIL/PIN MATERIAL: ALUMINUM OR STAINLESS STEEL OR STEEL.
**MADE TO CUSTOMER'S DRAWING.
Specifications :NO.508 ALUMINUM DRIVE ANCHOR
Materials :NO.508 ALUMINUM DRIVE ANCHOR
Sizes :NO.508 ALUMINUM DRIVE ANCHOR
Material: steel or stainless steel
Size: thread: m8, m10, m12, m16 & m20
Type: Eye type, Tail type, L type.
Specifications :NO.713 CAST IN SOCKET
Materials :NO.713 CAST IN SOCKET
Sizes :NO.713 CAST IN SOCKET
*Stainless steel body with alloy steel point.
Specifications :NO.417 BI-METAL SELF DRILLING SCREW
Materials :NO.417 BI-METAL SELF DRILLING SCREW
Sizes :NO.417 BI-METAL SELF DRILLING SCREW
Material: Steel Z/P; HDG; Stainless steel
Size: m10x45, m12x55, m12x75, m12x95, m16x75, m16x95, m16x105.
Pre-intall in wall. Just screw in wall anchor without drilling hole.
Specifications :NO.123 ELEPHANT FOOT CAST IN SOCKET
Materials :NO.123 ELEPHANT FOOT CAST IN SOCKET
Sizes :NO.123 ELEPHANT FOOT CAST IN SOCKET
Material: zinc alloy
3 points type
Size: 13 x 31mm & 13 x 42mm
Screw use of m4.0 to m4.2
Self drilling into plasterboard by electric screwdriver or normal screwdriver.
Specifications :NO.916 ZINC ALLOY SPEED DRIVE PLUG (SPP)
Materials :NO.916 ZINC ALLOY SPEED DRIVE PLUG (SPP)
Sizes :NO.916 ZINC ALLOY SPEED DRIVE PLUG (SPP)
NO.906HT FRAME SCREW SETTING TOOL
Specifications :NO.906HT FRAME SCREW SETTING TOOL
Materials :NO.906HT FRAME SCREW SETTING TOOL
Sizes :NO.906HT FRAME SCREW SETTING TOOL
NO.607 STEEL / NYLON TOGGLE
Specifications :NO.607 STEEL / NYLON TOGGLE
Materials :NO.607 STEEL / NYLON TOGGLE
Sizes :NO.607 STEEL / NYLON TOGGLE
Material: steel or stainless steel
Size: thread: m5, m6, m8, m10, m12
Apply to coupling threaded rod.
Specifications :NO.122 ROUND COUPLING NUT
Materials :NO.122 ROUND COUPLING NUT
Sizes :NO.122 ROUND COUPLING NUT
NO.SC HOLLOW WALL ANCHOR SUITCASE
Specifications :NO.SC HOLLOW WALL ANCHOR SUITCASE
Materials :NO.SC HOLLOW WALL ANCHOR SUITCASE
Sizes :NO.SC HOLLOW WALL ANCHOR SUITCASE
Material: plastic
Size: o.d.: 5x20mm; 6x25mm; 8x30mm; 10x40mm
Color can be changed as request.
Use with wood screw.
Specifications :NO.807 PLASTIC RIB PLUG
Materials :plastic
Sizes :5x20mm; 6x25mm; 8x30mm; 10x40mm
Material: steel & stainless steel.
Size: M6, M8, M10, M12
With hex head bolt: 4.6 grade, 5.8 grade, 8.8 grade
Hook assembly types: c hook, o hook
Body shells can be supplied separately.
Specifications :NO.502 ONE SEGMENT EXPAND SHIELD (TAM SHIELD)
Materials :steel & stainless steel.
Sizes :M6, M8, M10, M12
*Side mount & Vertical mount.
*Wood screw & Tek screw
Specifications :NO.415 ROD HANGER
Materials :NO.415 ROD HANGER
Sizes :NO.415 ROD HANGER
MATERIAL: STEEL
SIZE: M6
FLAT HEAD TORX RECESS
APPLY TO TIMBER, WOOD.
DEPTH CAN BE ADJUSTED, DUE TO 2 PARTS OF THREAD.
Specifications :NO.408 ADJUSTING SCREW
Materials :STEEL
Sizes :M6
NO.302-7 TIE WIRE WEDGE ANCHOR
Specifications :NO.302-7 TIE WIRE WEDGE ANCHOR
Materials :NO.302-7 TIE WIRE WEDGE ANCHOR
Sizes :NO.302-7 TIE WIRE WEDGE ANCHOR
Material: plastic
Size: o.d.: 6x38mm; 8x51mm; 10x61mm
With rim or without rim.
Apply to solid wall and hollow wall.
Specifications :NO.809 UNIVERSAL PLASTIC PLUG
Materials :plastic
Sizes :6x38mm; 8x51mm; 10x61mm
MATERIAL: STEEL or STAINLESS STEEL
ALL SIZES AVAILABLE.
APPLY TO INSTALLATION OF CEILING.
BAND CAN BE CUTTED AT ANY LENGTH FOR INSTALLATION REQUIREMENT.
Specifications :NO.412 PERFORATED BANDING STRAP
Materials :STEEL or STAINLESS STEEL
Sizes :ALL SIZES AVAILABLE.
Material: nylon or pp.
size: 14 x 33mm
Electric drill is not necessary. Install only by screwdriver.
Self drilling into plasterboard.
Fixture of lighter load.
Use with chipboard screw.
Specifications :NO.909 PLASTIC SPEED DRIVE PLUG
Materials :nylon or pp.
Sizes :14 x 33mm
Material: Steel
Metric size: m5, m6, m8
One-forming. Strength is better than spring toggle wing.
Specifications :NO.604 GRAVITY TOGGLE: HD
Materials :Steel
Sizes :m5, m6, m8
Material: steel, yellow z/p.
With blue ring and undercap.
Size: m6x8x48; m8x12x80; m10x14x80; m12x16x80mm.
Embossed (knurled) on surface.
Use chemical resin to fix sleeve in wall.
Specifications :NO.710 INNER THREAD STEEL SLEEVE (PIPE ANCHOR)
Materials :steel, yellow z/p.
Sizes :m6x8x48; m8x12x80; m10x14x80; m12x16x80mm.
Material: Steel
Metric size: 405D, 409D, 422D, 423D
Unc size: 1/8XSD, 1/8SD, 1/8SLD, 1/8LD
Specifications :NO.102D DRIVE ANCHORS
Materials :Steel
Sizes :405D, 409D, 422D, 423D
PROFESSIONAL USE
PORTABLE; EASY TO USE.
LONG-DURABLE
Specifications :NO.HT-01 HOLLOW WALL ANCHOR SETTING TOOL
Materials :NO.HT-01 HOLLOW WALL ANCHOR SETTING TOOL
Sizes :NO.HT-01 HOLLOW WALL ANCHOR SETTING TOOL
MATERIAL: STEEL, STAINLESS STEEL
METRIC SIZE: M6, M8, M10, M12, M16, M20
UNC SIZE: 1/4”, 3/8”, 1/2”, 5/8”, 3/4”
PLAIN BODY & EMBOSSED BODY ARE AVAILABLE.
Specifications :NO.403 DROP IN ANCHOR
Materials :STEEL, STAINLESS STEEL
Sizes :M6, M8, M10, M12, M16, M20
Material: steel
Size: thread from 2.5mmo 6.0mm; length from 12mm to 200mm.
Head type: csk head, pan head.
Recess: pozi, torx.
Full thread or half thread.
Apply to timber, wood.
Various surface treatment.
Specifications :NO.131 CHIPBOARD SCREW
Materials :steel
Sizes :thread from 2.5mmo 6.0mm; length from 12mm to 200mm.
Material: nylon plug + steel nail.
Size: OD: 3/16” (5mm) & 1/4” (6.5mm); length from 1” to 6”.
With steel nail slotted head.
Head type: flat head, round head, mushroom head.
Specifications :NO.801 NYLON NAIL PLUG
Materials :nylon plug + steel nail.
Sizes :3/16” (5mm) & 1/4” (6.5mm); length from 1” to 6”.
NO.917 SEVEN HOOK S/S A2
Specifications :NO.917 SEVEN HOOK S/S A2
Materials :NO.917 SEVEN HOOK S/S A2
Sizes :NO.917 SEVEN HOOK S/S A2
NO.308 IR SLEEVE ANCHOR
Specifications :NO.308 IR SLEEVE ANCHOR
Materials :NO.308 IR SLEEVE ANCHOR
Sizes :NO.308 IR SLEEVE ANCHOR
Material: steel
Size: m8, m12
Wood thread to suit wall plug.
O-ring head by spot welding
Specifications :NO.701 EYE BOLT WELDED
Materials :steel
Sizes :m8, m12
MATERIAL: STEEL
SIZE: 6 X 60, 8 X 95, 8 X 115
APPLY TO LIGHT-DUTY CONCRETE WALL.
Specifications :NO.411 HEMA NAILS (PIPE TYPE)
Materials :STEEL
Sizes :6 X 60, 8 X 95, 8 X 115
NO.819 3 IN ONE PLASTIC PLUG
Specifications :NO.819 3 IN ONE PLASTIC PLUG
Materials :NO.819 3 IN ONE PLASTIC PLUG
Sizes :NO.819 3 IN ONE PLASTIC PLUG
Material: nylon plug + steel wood screw
Size: o.d.: 8mm, 10mm
With pozi head screw
Two wing or four wing is available.
Specifications :NO.704 NYLON FRAME FIXING (SCREW IN)
Materials :nylon plug + steel wood screw
Sizes :8mm, 10mm
*Just hand press to clamp 45 degree guider tool into decking wood.
*Wood board wide range from 95-140mm.
*Decking screw material: S/S #316 & Steel ruspert
Specifications :NO.919 HIDDEN GUIDER TOOL (FOR DECKING SCREW)
Materials :NO.919 HIDDEN GUIDER TOOL (FOR DECKING SCREW)
Sizes :NO.919 HIDDEN GUIDER TOOL (FOR DECKING SCREW)
Material: Steel
Metric size: m4, m5
One-forming. Strength is better than spring toggle wing.
Specifications :NO.603 GRAVITY TOGGLE TYPE: LD
Materials :Steel
Sizes :m4, m5
*FOR FRAME SCREW
Specifications :NO.9064 WOOD STEP DRILL
Materials :NO.9064 WOOD STEP DRILL
Sizes :NO.9064 WOOD STEP DRILL
Anchor bolts
Specifications :Anchor bolts
Materials :Anchor bolts
Sizes :Anchor bolts
Material: nylon plug + plastic nail
Plug size: 10x60mm; 10x80mm; 10x100mm; 10x120mm; 10x135mm.
Big disc od: 60mm
Big disc can fix bigger surface-area of object.
Specifications :NO.816 NYLON NAIL PLUG WITH SEPARATE BIG DISC
Materials :nylon plug + plastic nail
Sizes :10x60mm; 10x80mm; 10x100mm; 10x120mm; 10x135mm.
Material: zinc plug + steel screw
Cone nut type
Size: o.d.: 8mm, 10mm
Csk head or pan head screw is available.
Plastic cap also supplying
Specifications :NO.706 METAL FRAME ANCHOR
Materials :zinc plug + steel screw
Sizes :8mm, 10mm
Material: pvc.
Flute type & Taper type
Size: OD: 4mm (yellow), 5mm (white), 6mm (red), 7mm (green), 8mm (blue), 10mm (orange)
Length: from 25mm to 60mm.
Packing: in bulk or cardboard box or frame pack 25pcs.
Specifications :NO.802 PVC WALL PLUG
Materials :pvc.
Sizes :4mm (yellow), 5mm (white), 6mm (red), 7mm (green), 8mm (blue), 10mm (orange) Length: from 25mm to 60mm.
Material: steel, zinc plated or black.
Size: 10x30mm & 10x40mm
Use hammer to hit into plasterboard, then fix by screw.
Specifications :NO.815 PLASTER BOARD HAMMER STEEL ANCHOR
Materials :steel, zinc plated or black.
Sizes :10x30mm & 10x40mm
**TYPE 17 CUTTING
Specifications :NO.132 WOOD SCREW, U THREAD
Materials :NO.132 WOOD SCREW, U THREAD
Sizes :NO.132 WOOD SCREW, U THREAD
Material: steel, zinc plated.
Metric size: M5X30, M6X32, M8X38, M8X60, M10X60
Expansion by using wood screw.
Specifications :NO.509 SLEEVE SPREADING ANCHOR
Materials :steel, zinc plated.
Sizes :M5X30, M6X32, M8X38, M8X60, M10X60
NO.723 PLASTIC PACKER (U TYPE)
Specifications :NO.723 PLASTIC PACKER (U TYPE)
Materials :NO.723 PLASTIC PACKER (U TYPE)
Sizes :NO.723 PLASTIC PACKER (U TYPE)
Material: steel & stainless steel
Metric size: m6, m8, m10, m12, m16
Unc size: 1/4”, 5/6”, 3/8”, 5/8”, 3/4”, 7/8”
Without spring available
With short spring available.
With long spring available.
Specifications :NO.606 SPRING NUT (STRUT NUT)
Materials :steel & stainless steel
Sizes :Metric size: m6, m8, m10, m12, m16 Unc size: 1/4”, 5/6”, 3/8”, 5/8”, 3/4”, 7/8”
Material: steel
Size: M6, M8, M10, M12
With plastic ring & undercap
With hex head bolt 8.8 grade
Hook assembly types: c hook, o hook – bending hook or forged hook.
Body shells can be supplied separately.
Specifications :NO.409 EXPAND SHIELD WITH TWO RING (TWO SEGMENT)
Materials :steel
Sizes :M6, M8, M10, M12
Material: zinc alloy
Size: 15 x 29mm.
Screw use of m4.0 to m4.2
Self drilling into plasterboard by electric screwdriver or normal screwdriver.
Specifications :NO.908 ZICN ALLOY SPEED DRIVE PLUG (SPA)
Materials :zinc alloy
Sizes :15 x 29mm.
Material: zinc alloy nut + steel screw
Size: m7x50, m7x70, m7x90, m7x120
Various color of plastic cap also available.
Specifications :NO.906 FRAME SCREW
Materials :zinc alloy nut + steel screw
Sizes :m7x50, m7x70, m7x90, m7x120
*MATERIAL: STEEL OR STAINLESS STEEL
*ROUND THREAD TYPE
Specifications :NO.127 LIFTING SOCKET ROUND THREAD, WITH PLASTIC CAP
Materials :STEEL OR STAINLESS STEEL
Sizes :NO.127 LIFTING SOCKET ROUND THREAD, WITH PLASTIC CAP
Material: PP
Size (grip range): PE (4-12mm); PF (15-19mm); PG (24-28mm)
Apply to hollow wall.
Install with wood screw.
Specifications :NO.811 SAFE PLASTIC TOGGLE
Materials :PP
Sizes :PE (4-12mm); PF (15-19mm); PG (24-28mm)
MATERIAL: ALUMINUM
SIZE: M4 X 39
APPLY TO ELECTRICAL APPLIANCE.
Specifications :NO.101A ALUMINUM HOLLOW WALL ANCHOR
Materials :ALUMINUM
Sizes :M4 X 39
Material: steel
Plating: zinc plated, black phosphate, gray phosphate.
Size: thread: 3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
Head type: bugle head.
Recess: Phillips #2
Self drilling tip into steel sheet.
Apply to plasterboard.
Specifications :NO.15-61 BUGLE HEAD SELF DRILLING SCREW
Materials :steel
Sizes :3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
*FOR NYLON WALL PLUG
Specifications :NO.1525 SAFETY SCREW
Materials :NO.1525 SAFETY SCREW
Sizes :NO.1525 SAFETY SCREW
Material: nylon or plastic
Size: m4x20; m5x25; m6x30; m7x37; m8x40; m10x50; m12x60; m14x75
Color can be changed as request.
Lower prices.
Use with wood screw.
Specifications :NO.804 F TYPE WALL PLUG
Materials :nylon or plastic
Sizes :m4x20; m5x25; m6x30; m7x37; m8x40; m10x50; m12x60; m14x75
Material: head: pp. nail: s/s A2, A4, steel NANO.
Size: 2.13x30mm; 2.13 x 40mm, 3.35x40mm, 3.35 x 50mm, 3.35 x 65mm.
Various head color: white, brown, black, oak.
Matches with most products
Fix uPVC profiles in combination with the annular ring shank nails.
Apply to secure claddings, fascias and soffits.
Specifications :NO.1508 PLASTIC HEADED NAIL (POLYTOP PIN)
Materials :pp. nail: s/s A2, A4, steel NANO.
Sizes :2.13x30mm; 2.13 x 40mm, 3.35x40mm, 3.35 x 50mm, 3.35 x 65mm.
NO.820 STRIP PLASTIC PLUG
Specifications :NO.820 STRIP PLASTIC PLUG
Materials :NO.820 STRIP PLASTIC PLUG
Sizes :NO.820 STRIP PLASTIC PLUG
Material: nylon plug + steel wood screw
Cone nut type
Size: o.d.: 8mm, 10mm
With pozi head screw
Plastic cap also supplying
Specifications :NO.705 NYLON FRAME ANCHOR
Materials :nylon plug + steel wood screw
Sizes :8mm, 10mm
With styrene or without styrene is available.
Size: 235ml, 345ml & 380ml
Guarantee for 1 year.
Specifications :NO.708 EASY-MIXING MORTAR (RESIN)
Materials :NO.708 EASY-MIXING MORTAR (RESIN)
Sizes :235ml, 345ml & 380ml
*SIZE: M8X125, M8X155, M10X125, M10X155
Specifications :NO.705 MARBLE FIXING SET
Materials :NO.705 MARBLE FIXING SET
Sizes :M8X125, M8X155, M10X125, M10X155
MATERIAL: STEEL
METRIC SIZE OR INCH SIZE IS AVAILABLE.
SIZE: M4, M5, M6, 1/8”, 3/16”, 1/4”.
INSTALL: APPLY TO THIN METAL SHEETS FORMING A NUT SHAPE IN METAL SHEET IN ORDER TO SCREW IN
INSTALLS EASILY AND QUICKLY BY SETTING TOOL
Specifications :NO.103 JACK NUT
Materials :STEEL
Sizes :M4, M5, M6, 1/8”, 3/16”, 1/4”.
**MATERIAL: STEEL
**SIZE: M6
**APPLY TO TIMBER, WOOD.
**DEPTH OF SCREW CAN BE ADJUSTED.
Specifications :NO.413 SPACING SCREW
Materials :STEEL
Sizes :M6
MATERIAL: STEEL
METRIC SIZE: M10, M12, M16, M20
ASSEMBLED WITH HEX BOLT & WASHER.
PLASTIC RING IN MIDDLE.
APPLY TO HEAVY DUTY
Specifications :NO.306 SAFETY ANCHOR, HEAVY DUTY
Materials :STEEL
Sizes :M10, M12, M16, M20
Material: steel
size: 8 x 32mm
Hit in concrete ceiling wall with hammer.
Use with steel strap band for hanging water pipe, air-conditioning pipe..etc.
Specifications :NO.911 KEY CEILING ANCHOR
Materials :steel
Sizes :8 x 32mm
Content: 20pcs 25mm bits + 1pc 50mm bit + 1pc magnetic big holder
All of normal common bits can be easy to find and store.
Convenient to bring for work.
Specifications :NO.15-36 HANGER BIT PACKAGE--22PCS
Materials :NO.15-36 HANGER BIT PACKAGE--22PCS
Sizes :NO.15-36 HANGER BIT PACKAGE--22PCS
Material: steel
** HEAD TYPE: EYE TYPE OR MUSHROOM HEAD
Size: o.d. 5mm, 6.5mm
Installed by hammer
Specifications :NO.512 BENDING SPIKE
Materials :steel
Sizes :5mm, 6.5mm
Material: pp
Size (grip range): PA (3-5mm); PB (9-13mm); PC (16-18mm); PD (26-28mm)
Push pin also available.
Apply to hollow wall.
Load light duty objects.
Specifications :NO.803 PLASTIC TOGGLE
Materials :pp
Sizes :PA (3-5mm); PB (9-13mm); PC (16-18mm); PD (26-28mm)
*TOP SPRING STRUT NUT (S/S SPRING / STEEL NUT)
Specifications :NO.606-1 STEEL STRUT NUT
Materials :NO.606-1 STEEL STRUT NUT
Sizes :NO.606-1 STEEL STRUT NUT
NO.510 EXPAND ANCHOR ITALY TYPE LIGHT DUTY
Specifications :NO.510 EXPAND ANCHOR ITALY TYPE LIGHT DUTY
Materials :NO.510 EXPAND ANCHOR ITALY TYPE LIGHT DUTY
Sizes :NO.510 EXPAND ANCHOR ITALY TYPE LIGHT DUTY
Material: steel, stainless steel.
Size: M6, M8, M10, M12, M16
With hex head bolt
Hook assembly types: c hook, o hook – bending hook or forged hook.
Body shells can be supplied separately.
Specifications :NO.501 EXPANSION ANCHOR P TYPE 4 SEGMENT (FIX BOLT)
Materials :steel, stainless steel.
Sizes :M6, M8, M10, M12, M16
Material: plastic
With 3 points on top
size: 15x28mm; 10x33.5mm; 15x43.5mm
Electric drill is not necessary. Install only by screwdriver.
Specifications :NO.813 AUGER PLASTIC ANCHOR
Materials :plastic
Sizes :NO.813 AUGER PLASTIC ANCHOR
*MATERIAL: ZINC ALLOY
**WOOD SCREW & CONCRETE SCREW TO SUIT THE SLEEVE ALSO AVAILABLE.
Specifications :NO.906S WINDOW FRAME SLEEVE, ZINC ALLOY
Materials :ZINC ALLOY
Sizes :NO.906S WINDOW FRAME SLEEVE, ZINC ALLOY
*MATERIAL: Steel or Stainless Steel
*Metric size and Inch size.
*Length: 1meter, 2meters, 3meters
Specifications :NO.915 THREAD ROD
Materials :Steel or Stainless Steel
Sizes :Length: 1meter, 2meters, 3meters
Material: plastic
Size: o.d.: 5x20mm; 6x25mm; 8x30mm; 10x40mm
Color can be changed as request.
Use with wood screw.
Specifications :NO.807 PLASTIC RIB PLUG
Materials :plastic
Sizes :5x20mm; 6x25mm; 8x30mm; 10x40mm
Material: steel
size: 8x20x42mm
Hit in concrete ceiling wall with hammer.
Specifications :NO.911S TUBE EYE CEILING ANCHOR
Materials :steel
Sizes :8x20x42mm
MATERIAL: SOLID BRASS
METRIC SIZE: M4, M5, M6, M8, M10, M12, M14
Specifications :NO.402 BRASS ANCHOR
Materials :SOLID BRASS
Sizes :M4, M5, M6, M8, M10, M12, M14
Material: steel, zinc plated or yellow z/p.
Size: o.d.: m6, m8, m10, m12, m16 & m20.
Installed by hammer; easy install.
Specifications :NO.712 HIT ANCHOR
Materials :steel, zinc plated or yellow z/p.
Sizes :m6, m8, m10, m12, m16 & m20.
Material: steel, yellow z/p or white z/p.
Head type: flat head.
Size: thread: 3.5mm, 4mm, 5mm, 7mm.
Suit with nylon plug.
Specifications :NO.1504 NAIL SCREW
Materials :steel, yellow z/p or white z/p.
Sizes :3.5mm, 4mm, 5mm, 7mm.
Material: steel, blue ruspert (Teflon).
Size: o.d.: 3/16” & 1/4”.
Head type: CSK head phillips or hex washer head slotted.
Specifications :NO.711 BLUE CONCRETE SCREW
Materials :steel, blue ruspert (Teflon).
Sizes :3/16” & 1/4”
MATERIAL: STEEL
METRIC SIZE: M4, M5, M6
INCH SIZE: 1/8”, 3/16”, 1/4”
WITH TRUSS HEAD SCREW
Specifications :NO.102 HOLLOW WALL ANCHOR (M TYPE SYSTEM)
Materials :STEEL
Sizes :M4, M5, M6 INCH SIZE: 1/8”, 3/16”, 1/4”
NO.724 RUBBER NUT
Specifications :NO.724 RUBBER NUT
Materials :NO.724 RUBBER NUT
Sizes :NO.724 RUBBER NUT
NO.302-8 SELF DRILL CEILING ANCHOR
Specifications :NO.302-8 SELF DRILL CEILING ANCHOR
Materials :NO.302-8 SELF DRILL CEILING ANCHOR
Sizes :NO.302-8 SELF DRILL CEILING ANCHOR
NO.821 TEN PLASTIC PLUG
Specifications :NO.821 TEN PLASTIC PLUG
Materials :NO.821 TEN PLASTIC PLUG
Sizes :NO.821 TEN PLASTIC PLUG
Injection gun for all kind of size.
Pushing is smooth, not get jam.
Durable, not easy to damage.
Specifications :NO.708 CAULKING GUN
Materials :NO.708 CAULKING GUN
Sizes :NO.708 CAULKING GUN
Material: Steel
Round nut type, strength is the best.
With hex head bolt available.
With thread bar available.
With closed eye available.
With open eye available.
Specifications :NO.605 GRAVITY TOGGLE BOLT
Materials :Steel
Sizes :NO.605 GRAVITY TOGGLE BOLT
Material: zinc alloy
Size: 13 x 33mm
Screw use of m4.0 to m4.2
Self drilling into plasterboard by electric screwdriver or normal screwdriver.
Specifications :NO.910 ZINC ALLOY SPEED DRIVE PLUG (SPC)
Materials :zinc alloy
Sizes :13 x 33mm
NO.514 METAL INSULATION PLUG
Specifications :NO.514 METAL INSULATION PLUG
Materials :NO.514 METAL INSULATION PLUG
Sizes :NO.514 METAL INSULATION PLUG
Material: steel or stainless steel
Metric thread: m5, m6, m8, m10, m12, m16 & m20
Unc thread: 1/4”, 5/16”, 3/8”, 1/2”, 5/8” & 3/4”
Apply to coupling threaded rod.
Specifications :NO.121 HEX COUPLING NUT
Materials :steel or stainless steel
Sizes :m5, m6, m8, m10, m12, m16 & m20 Unc thread: 1/4”, 5/16”, 3/8”, 1/2”, 5/8” & 3/4”
NO.126 SOLID BAR SOCKET
Specifications :NO.126 SOLID BAR SOCKET
Materials :NO.126 SOLID BAR SOCKET
Sizes :NO.126 SOLID BAR SOCKET
Material: Steel, stainless steel
Size: M6, M8, M10, M12
With hex head bolt
Hook assembly types: c hook, o hook – bending hook or forged hook
Body shells can be supplied separately.
Specifications :NO.506 EXPANSION ANCHOR R TYPE 3 SEGMENT
Materials :Steel, stainless steel
Sizes :M6, M8, M10, M12
Material: steel
Plating: zinc plated, black phosphate, gray phosphate.
Size: thread: 3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
Head type: bugle head.
Recess: Phillips #2
Self drilling tip into steel sheet.
Apply to plasterboard.
Specifications :NO.1561 SELF DRILLING SCREW, BUGLE HEAD
Materials :steel
Sizes :3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
NO.104HT HOLLOW WALL ANCHOR HAND TOOL
Specifications :NO.104HT HOLLOW WALL ANCHOR HAND TOOL
Materials :NO.104HT HOLLOW WALL ANCHOR HAND TOOL
Sizes :NO.104HT HOLLOW WALL ANCHOR HAND TOOL
Material: nylon plug + steel nail screw
Size: o.d.: 5mm, 6mm, 8mm
With pozi head nail screw
Head type: CSK head, Round head, Mushroom head, Flush head.
Specifications :NO.806 NYLON NAIL IN ANCHOR
Materials :nylon plug + steel nail screw
Sizes :5mm, 6mm, 8mm
Material: plastic
Size: 3/16 x 3/4”; 3/16 x 7/8”; 1/4 x 1”; 5/16 x 1-1/2”
Color can be changed as request.
Use with wood screw.
Specifications :NO.808 CONICAL PLUG
Materials :plastic
Sizes :3/16 x 3/4”; 3/16 x 7/8”; 1/4 x 1”; 5/16 x 1-1/2”
Material: steel
Plating: zinc plated, black phosphate, gray phosphate.
Size: thread: 3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
Head type: bugle head.
Recess: Phillips #2
Screw tip
Apply to plasterboard.
Screw strip: install more quickly by electric power tool.
Specifications :NO.15-47PS COLLATED PLASTIC STRIP DRYWALL SCREW
Materials :steel
Sizes : 3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
NO.414 HEX SHOULDER WOOD SCREW
Specifications :NO.414 HEX SHOULDER WOOD SCREW
Materials :NO.414 HEX SHOULDER WOOD SCREW
Sizes :NO.414 HEX SHOULDER WOOD SCREW
Material: steel
Head type: flat head & eye type.
O.d.: 3/16” & 1/4”; length: 1” to 4”.
Specifications :NO.504 STEEL SPLIT DRIVE ANCHOR
Materials :steel
Sizes :NO.504 STEEL SPLIT DRIVE ANCHOR
